gg_dxf.h

Go to the documentation of this file.

/*
 gg_dxf.h -- Gaia common support for DXF files
  
 version 4.2, 2014 July 25

 Author: Sandro Furieri a.furieri@lqt.it

 ------------------------------------------------------------------------------
 
 Version: MPL 1.1/GPL 2.0/LGPL 2.1
 
 The contents of this file are subject to the Mozilla Public License Version
 1.1 (the "License"); you may not use this file except in compliance with
 the License. You may obtain a copy of the License at
 http://www.mozilla.org/MPL/
 
Software distributed under the License is distributed on an "AS IS" basis,
WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
for the specific language governing rights and limitations under the
License.

The Original Code is the SpatiaLite library

The Initial Developer of the Original Code is Alessandro Furieri
 
Portions created by the Initial Developer are Copyright (C) 2008-2013
the Initial Developer. All Rights Reserved.

Contributor(s):

Alternatively, the contents of this file may be used under the terms of
either the GNU General Public License Version 2 or later (the "GPL"), or
the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
in which case the provisions of the GPL or the LGPL are applicable instead
of those above. If you wish to allow use of your version of this file only
under the terms of either the GPL or the LGPL, and not to allow others to
use your version of this file under the terms of the MPL, indicate your
decision by deleting the provisions above and replace them with the notice
and other provisions required by the GPL or the LGPL. If you do not delete
the provisions above, a recipient may use your version of this file under
the terms of any one of the MPL, the GPL or the LGPL.
 
*/


#ifndef _GG_DXF_H
#ifndef DOXYGEN_SHOULD_SKIP_THIS
#define _GG_DXF_H
#endif

#ifdef __cplusplus
extern "C"
{
#endif

/* constant values for DXF */

#define GAIA_DXF_IMPORT_BY_LAYER        1

#define GAIA_DXF_IMPORT_MIXED           2

#define GAIA_DXF_AUTO_2D_3D             3

#define GAIA_DXF_FORCE_2D               4

#define GAIA_DXF_FORCE_3D               5

#define GAIA_DXF_RING_NONE              6

#define GAIA_DXF_RING_LINKED            7

#define GAIA_DXF_RING_UNLINKED          8


#define GAIA_DXF_V12    1000

/* data structs */


    typedef struct gaia_dxf_extra_attr
    {
        char *key;
        char *value;
        struct gaia_dxf_extra_attr *next;
    } gaiaDxfExtraAttr;
    typedef gaiaDxfExtraAttr *gaiaDxfExtraAttrPtr;

    typedef struct gaia_dxf_insert
    {
        char *block_id;
        double x;
        double y;
        double z;
        double scale_x;
        double scale_y;
        double scale_z;
        double angle;
        int hasText;
        int hasPoint;
        int hasLine;
        int hasPolyg;
        int hasHatch;
        int is3Dtext;
        int is3Dpoint;
        int is3Dline;
        int is3Dpolyg;
        gaiaDxfExtraAttrPtr first;
        gaiaDxfExtraAttrPtr last;
        struct gaia_dxf_insert *next;
    } gaiaDxfInsert;
    typedef gaiaDxfInsert *gaiaDxfInsertPtr;

    typedef struct gaia_dxf_text
    {
        char *label;
        double x;
        double y;
        double z;
        double angle;
        gaiaDxfExtraAttrPtr first;
        gaiaDxfExtraAttrPtr last;
        struct gaia_dxf_text *next;
    } gaiaDxfText;
    typedef gaiaDxfText *gaiaDxfTextPtr;

    typedef struct gaia_dxf_point
    {
        double x;
        double y;
        double z;
        gaiaDxfExtraAttrPtr first;
        gaiaDxfExtraAttrPtr last;
        struct gaia_dxf_point *next;
    } gaiaDxfPoint;
    typedef gaiaDxfPoint *gaiaDxfPointPtr;

    typedef struct gaia_dxf_circle
    {
        double cx;
        double cy;
        double cz;
        double radius;
    } gaiaDxfCircle;
    typedef gaiaDxfCircle *gaiaDxfCirclePtr;

    typedef struct gaia_dxf_arc
    {
        double cx;
        double cy;
        double cz;
        double radius;
        double start;
        double stop;
    } gaiaDxfArc;
    typedef gaiaDxfArc *gaiaDxfArcPtr;

    typedef struct gaia_dxf_hole
    {
        int points;
        double *x;
        double *y;
        double *z;
        struct gaia_dxf_hole *next;
    } gaiaDxfHole;
    typedef gaiaDxfHole *gaiaDxfHolePtr;

    typedef struct gaia_dxf_polyline
    {
        int is_closed;
        int points;
        double *x;
        double *y;
        double *z;
        gaiaDxfHolePtr first_hole;
        gaiaDxfHolePtr last_hole;
        gaiaDxfExtraAttrPtr first;
        gaiaDxfExtraAttrPtr last;
        struct gaia_dxf_polyline *next;
    } gaiaDxfPolyline;
    typedef gaiaDxfPolyline *gaiaDxfPolylinePtr;
    typedef struct gaia_dxf_hatch_segm
    {
        double x0;
        double y0;
        double x1;
        double y1;
        struct gaia_dxf_hatch_segm *next;
    } gaiaDxfHatchSegm;
    typedef gaiaDxfHatchSegm *gaiaDxfHatchSegmPtr;

    typedef struct gaia_dxf_boundary_path
    {
        gaiaDxfHatchSegmPtr first;
        gaiaDxfHatchSegmPtr last;
        struct gaia_dxf_boundary_path *next;
    } gaiaDxfBoundaryPath;
    typedef gaiaDxfBoundaryPath *gaiaDxfBoundaryPathPtr;

    typedef struct gaia_dxf_hatch
    {
        double spacing;
        double angle;
        double base_x;
        double base_y;
        double offset_x;
        double offset_y;
        gaiaDxfBoundaryPathPtr first;
        gaiaDxfBoundaryPathPtr last;
        gaiaGeomCollPtr boundary;
        gaiaDxfHatchSegmPtr first_out;
        gaiaDxfHatchSegmPtr last_out;
        struct gaia_dxf_hatch *next;
    } gaiaDxfHatch;
    typedef gaiaDxfHatch *gaiaDxfHatchPtr;

    typedef struct gaia_dxf_block
    {
        int hasInsert;
        char *layer_name;
        char *block_id;
        gaiaDxfTextPtr first_text;
        gaiaDxfTextPtr last_text;
        gaiaDxfPointPtr first_point;
        gaiaDxfPointPtr last_point;
        gaiaDxfPolylinePtr first_line;
        gaiaDxfPolylinePtr last_line;
        gaiaDxfPolylinePtr first_polyg;
        gaiaDxfPolylinePtr last_polyg;
        gaiaDxfHatchPtr first_hatch;
        gaiaDxfHatchPtr last_hatch;
        int is3Dtext;
        int is3Dpoint;
        int is3Dline;
        int is3Dpolyg;
        struct gaia_dxf_block *next;
    } gaiaDxfBlock;
    typedef gaiaDxfBlock *gaiaDxfBlockPtr;

    typedef struct gaia_dxf_layer
    {
        char *layer_name;
        gaiaDxfTextPtr first_text;
        gaiaDxfTextPtr last_text;
        gaiaDxfPointPtr first_point;
        gaiaDxfPointPtr last_point;
        gaiaDxfPolylinePtr first_line;
        gaiaDxfPolylinePtr last_line;
        gaiaDxfPolylinePtr first_polyg;
        gaiaDxfPolylinePtr last_polyg;
        gaiaDxfHatchPtr first_hatch;
        gaiaDxfHatchPtr last_hatch;
        gaiaDxfInsertPtr first_ins_text;
        gaiaDxfInsertPtr last_ins_text;
        gaiaDxfInsertPtr first_ins_point;
        gaiaDxfInsertPtr last_ins_point;
        gaiaDxfInsertPtr first_ins_line;
        gaiaDxfInsertPtr last_ins_line;
        gaiaDxfInsertPtr first_ins_polyg;
        gaiaDxfInsertPtr last_ins_polyg;
        gaiaDxfInsertPtr first_ins_hatch;
        gaiaDxfInsertPtr last_ins_hatch;
        int is3Dtext;
        int is3Dpoint;
        int is3Dline;
        int is3Dpolyg;
        int is3DinsText;
        int is3DinsPoint;
        int is3DinsLine;
        int is3DinsPolyg;
        int hasExtraText;
        int hasExtraPoint;
        int hasExtraLine;
        int hasExtraPolyg;
        int hasExtraInsText;
        int hasExtraInsPoint;
        int hasExtraInsLine;
        int hasExtraInsPolyg;
        struct gaia_dxf_layer *next;
    } gaiaDxfLayer;
    typedef gaiaDxfLayer *gaiaDxfLayerPtr;

    typedef struct gaia_dxf_parser
    {
        char *filename;
        gaiaDxfLayerPtr first_layer;
        gaiaDxfLayerPtr last_layer;
        gaiaDxfBlockPtr first_block;
        gaiaDxfBlockPtr last_block;
        int force_dims;
        int srid;
        const char *selected_layer;
        const char *prefix;
        int linked_rings;
        int unlinked_rings;
        int line_no;
        int op_code_line;
        int op_code;
        int section;
        int tables;
        int blocks;
        int entities;
        int is_layer;
        int is_block;
        int is_text;
        int is_point;
        int is_polyline;
        int is_lwpolyline;
        int is_line;
        int is_circle;
        int is_arc;
        int is_vertex;
        int is_hatch;
        int is_hatch_boundary;
        int is_insert;
        int eof;
        int error;
        char *curr_layer_name;
        gaiaDxfText curr_text;
        gaiaDxfInsert curr_insert;
        gaiaDxfBlock curr_block;
        gaiaDxfPoint curr_point;
        gaiaDxfPoint curr_end_point;
        gaiaDxfCircle curr_circle;
        gaiaDxfArc curr_arc;
        int is_closed_polyline;
        gaiaDxfPointPtr first_pt;
        gaiaDxfPointPtr last_pt;
        char *extra_key;
        char *extra_value;
        gaiaDxfExtraAttrPtr first_ext;
        gaiaDxfExtraAttrPtr last_ext;
        gaiaDxfHatchPtr curr_hatch;
        int undeclared_layers;
    } gaiaDxfParser;
    typedef gaiaDxfParser *gaiaDxfParserPtr;

    typedef struct gaia_dxf_write
    {
        FILE *out;
        int precision;
        int version;
        int count;
        int error;
    } gaiaDxfWriter;
    typedef gaiaDxfWriter *gaiaDxfWriterPtr;


/* function prototypes */


    GAIAGEO_DECLARE gaiaDxfParserPtr gaiaCreateDxfParser (int srid,
                                                          int force_dims,
                                                          const char *prefix,
                                                          const char
                                                          *selected_layer,
                                                          int special_rings);

    GAIAGEO_DECLARE void gaiaDestroyDxfParser (gaiaDxfParserPtr parser);

    GAIAGEO_DECLARE int gaiaParseDxfFile (gaiaDxfParserPtr parser,
                                          const char *dxf_path);

    GAIAGEO_DECLARE int gaiaParseDxfFile_r (const void *p_cache,
                                            gaiaDxfParserPtr parser,
                                            const char *dxf_path);

    GAIAGEO_DECLARE int gaiaLoadFromDxfParser (sqlite3 * db_handle,
                                               gaiaDxfParserPtr parser,
                                               int mode, int append);

    GAIAGEO_DECLARE int gaiaDxfWriterInit (gaiaDxfWriterPtr dxf,
                                           FILE * out, int precision,
                                           int version);

    GAIAGEO_DECLARE int
        gaiaDxfWriteHeader (gaiaDxfWriterPtr dxf, double minx, double miny,
                            double minz, double maxx, double maxy, double maxz);

    GAIAGEO_DECLARE int gaiaDxfWriteFooter (gaiaDxfWriterPtr dxf);

    GAIAGEO_DECLARE int gaiaDxfWriteTables (gaiaDxfWriterPtr dxf);

    GAIAGEO_DECLARE int gaiaDxfWriteLayer (gaiaDxfWriterPtr dxf,
                                           const char *layer_name);

    GAIAGEO_DECLARE int gaiaDxfWriteEntities (gaiaDxfWriterPtr dxf);

    GAIAGEO_DECLARE int gaiaDxfWriteEndSection (gaiaDxfWriterPtr dxf);

    GAIAGEO_DECLARE int gaiaDxfWritePoint (gaiaDxfWriterPtr dxf,
                                           const char *layer_name, double x,
                                           double y, double z);

    GAIAGEO_DECLARE int gaiaDxfWriteText (gaiaDxfWriterPtr dxf,
                                          const char *layer_name, double x,
                                          double y, double z, const char *label,
                                          double text_height, double angle);

    GAIAGEO_DECLARE int
        gaiaDxfWriteLine (gaiaDxfWriterPtr dxf, const char *layer_name,
                          gaiaLinestringPtr line);

    GAIAGEO_DECLARE int
        gaiaDxfWriteRing (gaiaDxfWriterPtr dxf, const char *layer_name,
                          gaiaRingPtr ring);

    GAIAGEO_DECLARE int
        gaiaDxfWriteGeometry (gaiaDxfWriterPtr dxf, const char *layer_name,
                              const char *label, double text_height,
                              double text_rotation, gaiaGeomCollPtr geometry);

    GAIAGEO_DECLARE int
        gaiaExportDxf (gaiaDxfWriterPtr dxf, sqlite3 * db_handle,
                       const char *sql, const char *layer_col_name,
                       const char *geom_col_name, const char *label_col_name,
                       const char *text_height_col_name,
                       const char *text_rotation_col_name,
                       gaiaGeomCollPtr geom_filter);

#ifdef __cplusplus
}
#endif

#endif                          /* _GG_DXF_H */